hi viewers...
I am feeling that Baseline is representation of parts/documents at a particular time.
at the same time we are having the right to replace the parts/documents with new iteration or version then it is no longer a representation at a particular time. I would like to know what is the intention of Baseline.
Regards
Madhu Nalla
Mike
See attached qml...
Tuned a bit for your specific requirements but the report objects and links are the same
See attached PowerPoint Slides - I think this answers your question.
Regards
Darren
Hallo,
ich habe ein Problem mit Windchill... Mein Arbeitskollege hat eine Zeichnugn (Explosionsansicht) von einem .PRT gemacht (alles super) und hat einige Folien ausgeblendet (dann gespeichert, auf Windchill eingecheckt etc.). Wenn ich die gleiche Zeichnung aufmache, sehe ich die ausgeblendeten Komponente wieder (und er auch bzw. sie wurden zwar gespeichert, aber nicht richtig).
Das zwite Problem ist: in der Explosionsansicht gibt es Textfelder mit der benennung der Komponenten, wenn ich diese auf meinem Windchill Account aufmache, sidne die Felder in einer anderen Location...
Wie kann ich dieses Probelm beheben?
Danke in vorraus
Corrado
It's a bug. To be fixed in Creo 4.1.
Applies to SolidWorks dxf when published as additional file, but if SW dxf is set as the default scaling is correct.
hi Darren,
thank you for the ppt.
I understood it well.
Don't ask why but I'm in need of code that can be applied in a workflow expression robot that counts the number of affected objects on a promotion request (technically the "promotion targets."). Need to branch the workflow if above a certain number.
Getting stuck trying to make it work - would appreciate any suggestions.
thanks in advance
Do you use WTParts? Could you use a WTPart to capture both under the WTPart "umbrella" so when the WTPart is checked out a preference would force checkout of both?
Mike,
It's been a while but I'm still doing some Windchill development work.
Assuming the Promotion Request is the workflow's PBO, this should get you what you want:
int numberOfTargets = wt.maturity.MaturityHelper.service.getPromotionTargets((wt.maturity.PromotionNotice)primaryBusinessObject).size();
David Graham
Hi,
I have a 5 sub types of CAD Document. Recently i have deleted to Attributes from the EPM Document after that i could not able to see any of my sub types under CAD Document.
Can anyone help me to sort out the issue ASAP.
Hi
On occasions the creation of a promotion request can produce an error due to the checks build in there. The user does get an error task in this case but if he does not verify his homepage he is under the impression that the promotion request went through and waits for approval. It should be good if he would get a pop-up box informing him that an error task exists for the just created pr.
Regards
Bernard
Windchill Parts if you used them, otherwise put both CAD parts into an arbitrary assembly. The assembly references can be used to gather both models when revising or promoting. There is no way to directly link one CAD document to another in Windchill. All the CAD Doc to CAD Doc relations are extracted from the model dependencies stored in the file.
You could also put both items into a managed collection, but this needs to be refreshed as the contents mature and it cannot be used by the revise collector.
We have added a number of validation checks into the promotion wizard (before PN is create) but this is a fairly heavy customization.
You could handle the errors in workflow with better email notification, if you consider that helpful. Of course you are still responding to a problem, rather than stopping it happening in the first place.
It is also a good idea to make sure your permission model does not allow standard users to checkout while the promotion objects are in the target state or the lock state.
Did you refresh the Lifecycle template for the data after making the changes to the Lifecycles? If not they are still using the older version of the Lifecycle and won't see these Transitions.
You can do this manually in the UI or if there is a large amount of data you might consider the steps in the related article
Sergey, thanks for this perfect solution! Problem solved!
not work for me
exeption
ESI Gurus,
By default ESI Distribution targets table is not available under Related objects tab on Part or ECN page for Windchill users. These windchill users are designers and ECN viewers.
OOTB forces us to add those users to ESI Author group in order to expose DT table. This is ok.
But we don't want to show Associate Distribution Targets and Remove actions for every users having access to DT table. Is there a way to hide Associate\Remove actions under DT table.
I have tried creating new group and assigning Read permission on ESI Target & ESI Transaction objects, but the end result is same as ESI Authors.
Thanks
Ayyappan
What version of Windchill are you on?
I really need help with this. It bugs me. When I go to open certain things (drawings, assemblies, whatever) I am given the pop up window that says "This object is read only as it is not checked out" and gives me a list of things to check out. I can find no rhyme or reason to what it wants me to check out. For instance, right now, I am trying to open a drawing of an assembly. The drawing is in a released state, the assemblies in the drawing are in released states. All I want to do is open the drawing. Why on earth would I be asked to check out two (not all, just two) of the sub assemblies?
Any clues, hints, nudges in the right direction would be hugely appreciated. I'm sure there's some logic, I'm just completely missing it.
10.2 M030 CSP 14